diff doc/jp/file.rst @ 3041:72583524cfd3

doc (jp): jp commands are now fully documented: rel 232
author Goffi <goffi@goffi.org>
date Tue, 01 Oct 2019 22:49:06 +0200
parents
children c3cb18236bdf
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/doc/jp/file.rst	Tue Oct 01 22:49:06 2019 +0200
@@ -0,0 +1,147 @@
+========================================
+file: files sending/receiving/management
+========================================
+
+``file`` group all commands related to file management, and allows you to send easily a
+file to a contact or device from the command line.
+
+send
+====
+
+Send a file to a contact.
+
+The file will be sent using best available method (which is Jingle File Transfer when
+available), and will try to send the file in P2P when possible.  If P2P is possible, the
+signal is sent through the server (metadata, negotiation, etc.), while the file itself
+goes directly from the source device to the target device. When P2P is not possible, the
+file may go through the server or an other one (if a proxy is used for instance).
+
+When sending a file, you specify one or more file(s) to send, and the either the bare jid
+or the full jid of the target device. If bare jid is specified, the main resource will be
+used.
+
+You'll usually want to see the progression of the transfer, use ``-P, --progress`` for
+that.
+
+If you send several files at once, you may want to use ``-b, --bz2`` to group them in a
+single compressed ``tar.bz2`` archive (the client receiving the files will then receive a
+single file, than the user can then decompress).
+
+By default the name of the source file is used, but you use ``-n NAME, --name NAME`` to
+specify another one.
+
+The path and namespace (set with ``-d PATH, --path PATH`` and ``-N NAMESPACE, --namespace
+NAMESPACE``) are non-standard metadata used by SàT to organise files (``PATH`` being like
+a file path on locale file system, and ``NAMESPACE`` being a name to associate to a group
+of files, for instance for a photo album).
+
+examples
+--------
+
+Send a file to Louise, with a progress bar::
+
+  $ jp file send -P some_file.ext louise@example.org
+
+Send a picture to a file sharing component, putting it in the ``holidays`` namespace, in
+the ``/some/path`` path::
+
+  $ jp file send -P -N holidays -d /some/path some_photo.jpg files.example.org
+
+.. _jp-file_request:
+
+request
+=======
+
+Ask to get a file from a device/sharing service. A file is requested using one or more
+metadata, which can be the file name (with ``-n NAME, --name NAME``), its hash (with ``-H
+HASH, --hash HASH`` and the algorithm may be specified with ``-a HASH_ALGO, --hash-algo
+HASH_ALGO``), its path (with ``-d PATH, --path PATH``) and its namespace (with ``-N
+NAMESPACE, --namespace NAMESPACE``). Note that ``PATH`` and ``NAMESPACE`` are SàT specific
+and not (yet?) XMPP standards.
+
+If you already know the hash, it's the most efficient and recommended way to retrieve a
+file.
+
+You need to specify the full jid of the device or the sharing service as a positional
+argument.
+
+By default the file is downloaded in current directory, but you can specify an other one
+(and an other filename) with ``-D DEST, --dest DEST``.
+
+If you want to see progression of the transfer, use ``-P, --progress``.
+
+examples
+--------
+
+Request a file names ``some_file.jpg`` in path ``/photos/demo_album`` at service
+``files.example.org``, with a progress bar::
+
+  $ jp file request -P -d photos/demo_album -n some_file.jpg files.example.org
+
+Request file with given ``sha-256`` hash (which is default hash algorithm, so we don't
+specify it), and save it to file ``dest_file.txt``::
+
+  $ jp file request -H f2ca1bb6c7e907d06dafe4687e579fce76b37e4e93b7605022da52e6ccc26fd2 -D dest_file.txt files.example.org
+
+receive
+=======
+
+Wait for a file (or several ones) to be received, and accept it if it match criteria.
+
+You should specify which jid you are expecting a file from, using the positional
+arguments. If you don't, all files will be accepted, which can be dangerous if some
+malicious user send you a file at this moment.
+
+To see progression (this is recommended), you can use the ``-P, --progress`` options.
+
+By default, if a file with the same name as the proposed one exists, the transfer will be
+denied. You can override this behaviour with ``-f, --force``, but be sure to absolutely
+trust the sender in this case, as the name is chosen by her, and could be malicious, or it
+could override an important file.
+
+If you expect several files, you can use the ``-m, --multiple``, in this case the command
+won't stop after the file received file, and you'll have to manually stop it with
+``Ctrl-C`` or by sending a ``SIGTERM``.
+
+File(s) will be written in the current directory, but you may specify an other destination
+with ``--path DIR``.
+
+examples
+--------
+
+Accept and receive the next file, save it to local directory and show a progress bar::
+
+  $ jp file receive --progress
+
+Several files are expected from Louise, accept them and store them do
+``~/Downloads/Louise``::
+
+  $ jp file receive --multiple --path ~/Downloads/Louise louise@example.org
+
+
+upload
+======
+
+Upload a file to your XMPP server (or an other entity if specified). The upload will be
+done using `XEP-0363 (HTTP File Upload)`_, and the public URL to retrieve the file will be
+printed. Note that anybody knowing this URL can download the file you've uploaded.
+
+The path to the file to upload is expected as first argument, then optionally the entity
+of the service to upload too (by default, this is autodetected if your server offers this
+feature).
+
+As usual, you can use ``-P, --progress`` to see a progress bar.
+
+.. _XEP-0363 (HTTP File Upload): XEP-0363: HTTP File Upload
+
+example
+-------
+
+Upload a document to a server::
+
+  $ jp file upload -P ~/Documents/something_interesting.odt
+
+share
+=====
+
+Subcommands for advanced file sharing. Please check :ref:`jp-file_share`.