view doc/components.rst @ 3717:11f7ca8afd15

plugin XEP-0384: fix typo in attribute
author Goffi <goffi@goffi.org>
date Tue, 25 Jan 2022 17:06:28 +0100
parents a1eff4e32848
children 643622ff1492
line wrap: on
line source

.. _components:

===================
Libervia Components
===================

Libervia can act as an XMPP server component, which can be seen as a generic plugin for
XMPP servers.

This page explains which components are available and how to use them.

Running a component
===================

Components are linked to a Libervia profile in the same way as normal clients.

To run a component, you'll need to know its *entry point*, which is the name of the import
name of plugin managing it. The entry point to use will be specified in the component
installation documentation.

You'll also have to declare the component on your XMPP server, this is a server dependent
step and you'll have to check your server documentation for details. You'll have to
specify a **shared secret** (can also be named simply *password*) that must be set both on
the XMPP server and as the XMPP password of the Libervia profile.

Here is a list of relevant documentation for most common servers:

ejabberd
  https://docs.ejabberd.im/admin/configuration/listen-options/

MongooseIm
  https://esl.github.io/MongooseDocs/latest/configuration/listen/#xmpp-components-listenservice

OpenFire
  use the web-based admin panel

Prosody
  https://prosody.im/doc/components

Tigase
  https://docs.tigase.net/tigase-server/stable-snapshot/Administration_Guide/webhelp/externalComponentConfiguration.html


On Libervia, setup is done with Libervia CLI's :ref:`profile create <li_profile_create>`
command.

You'll usually want to have the component to start automatically when the backend
is started, for this you must unset the profile password (not to be confused with the XMPP
password which is the one also set on the server configuration) with ``-p ""`` and set
auto-connection with ``-A``.

You'll specify the XMPP password (also named *shared secret* in `XEP-0144`_ terminology)
with ``-x <your_shared_secret>`` and the JID to use with ``-j
<component_subdomain>.<server.tld>``.

The component entry point is specified with ``-C <entry_point>``.

.. _XEP-0144: https://xmpp.org/extensions/xep-0114.html

example
-------

Louise wants to run an ActivityPub gateway on her server ``example.org`` with the JID
``ap.example.org``. The shared secret is ``xmpp_rocks`` and she wants the component to
start automatically with the backend, thus she doesn't set a profile password. The
entry-point for ActivityPub component is ``ap-gateway``, and she wants to use the same
name for the profile. To do this, she enters the following command::

  $ li profile create ap-gateway -j ap.example.org -p "" -x xmpp_rocks -C ap-gateway -A

The component will then be started next time Libervia Backend is launched. If Louise
wants to connect it immediately, she can use::

  $ li profile connect -cp ap-gateway

Available Components
====================

Below is a list of currently available components in Libervia, and instructions on what
they do and how to use them.


File Sharing
------------

**entry_point:** ``file-sharing``

File Sharing component manage the hosting of user files. Users can upload file there using
either `Jingle File Transfer`_ or `HTTP File Upload`_.

There is no limit to the size of files which can be uploaded, but administrators can set a
quota to limit the space that can be used.

Files can be retrieved using `File Information Sharing`_, and deleted using `Ad-Hoc Commands`_.

Files can be shared with a public HTTP link, or made available only to a specified list of
entities (JIDs). Permissions can be set through Ad-Hoc Commands.

.. _Jingle File Transfer: https://xmpp.org/extensions/
.. _HTTP File Upload: https://xmpp.org/extensions/xep-0363.html
.. _File Information Sharing: https://xmpp.org/extensions/xep-0329.html
.. _Ad-Hoc Commands: https://xmpp.org/extensions/xep-0050.html

Configuration
~~~~~~~~~~~~~

All options are to be set in ``[component file-sharing]`` section.

``http_upload_port``
  port to use for HTTP File Upload

  **default**: 8888

``http_upload_connection_type``
  either ``http`` or ``https``.

  **default**: ``https``

  Note that HTTP Upload should always be ``https`` to end-user, the ``http`` option is to
  be used only if you use a HTTP server as a proxy, and this server is already set for
  TLS.

``http_upload_public_facing_url``
  must be set to the URL that end-user will see. Notably useful if the component is behind
  a proxy.

  **default**: ``https://<component host>:<http_upload_port``

``quotas_json``
  a JSON object indicating quotas to use for users. The object can have 3 keys:

  ``admins``
    quotas to use for administrators (i.e. profiles set in ``admins_list``)

  ``users``
    quotas to use for normal users (i.e. non admin profiles)

  ``jids``
    per-jid specific quotas. The value is a JSON object where key is a user bare jid and
    value is a quota.

  Quotas can be either ``null`` for unlimited space, or a size value (`SI prefixes and
  binary prefixes`_ can be used).

  example::

    quotas_json = {
      "admins": null,
      "users": "50 Mio",
      "jids": {"pierre@example.org": "1 Gio"}
    }

  .. _SI prefixes and binary prefixes: https://en.wikipedia.org/wiki/Octet_(computing)#Unit_multiples


ActivityPub Gateway
-------------------

**entry_point:** ``ap-gateway``

.. note::

  this component is currently in active development, and not yet usable for end-user. This
  documentation will be updated during evolution of component.

  You can follow the development by reading `Libervia Progress Notes`_.

  .. _Libervia Progress Notes: https://www.goffi.org/tag/Libervia%20progress

This gateway will provide a bidirectional gateway between XMPP and `ActivityPub`_ (or AP
below). That means that user from XMPP will be able to follow actors or comments messages
from any software compatible with ActivityPub protocol, and vice versa.

.. _ActivityPub: https://activitypub.rocks/

.. note::

  this component is mostly tested with Prosody as XMPP server reference, and Mastodon as
  AP server reference, but it should work with any XMPP or AP server.

The component launches a HTTP server (necessary to communicate with AP software). This
server needs to handle HTTP requests made at paths ``/.well-known/webfinger`` and ``/_ap``
(or the ``ap_path`` set in configuration, see below). If the component is not directly
facing internet (e.g. integrated in an existing website though a proxy), you'll have to
redirect the requests made to those path to the HTTP server (i.e. to component host at the
port set at ``http_port``, see configuration below). Please check your HTTP server
documentation to find how this must be done.

how to address an AP actor from XMPP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

When addressing an ActivityPub actor from XMPP, you must use a JID corresponding to the
actor. The domain part of the JID correspond to the gateway JID (the one set in gateway
profile), while the local part (before the ``@``) is used to specify the AP actor.

`XEP-0106`_ (JID Escaping) is used to indicate the AP actor identifier, thus the ``@``
must be escaped with ``\40``.

.. _XEP-0106: JID Escaping

**example**

If Louise wants to talk to Pierre which is on the ``example.net`` AP server, she can use
her XMPP AP gateway which is at ``ap.example.org``. Pierre AP's actor identifier is
``pierre@example.net``, Louise can access it via the JID
``pierre\40example.net@ap.example.org``.

Of course, this is a bit cumbersome to do by hand, it is expected that XMPP clients will
do the (un)escaping automatically for end-user, in a way that Louise could enter
``pierre@example.net`` directly, with an indicator to show that this is an ActivityPub
actor identifier rather than an XMPP JID.

how to address an XMPP entity from AP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

To access an XMPP entity, just use its bare JID as AP actor.

**example**

If Pierre wants to talk Louise, he can directly use the JID which is the same as the AP
actor identifier, i.e. ``louise@example.org`` (note that on AP software, a ``@`` prefix is
often required, thus Pierre will look for ``@louise@example.org``).

.. note::

   Currently the gateway only uses bare JID, and character set must be recognised by the
   AP software to be used. This will evolve in the close future to have a way to access
   various XMPP Pubsub nodes.

   The actor endpoint can also be used directly in AP software (in the example above, it
   would be by default ``https://example.org/_ap/actor/louise%40example.org``).


using the component
~~~~~~~~~~~~~~~~~~~

The component is currently only usable for development purpose, and it can be used with
the following method (with can be accessed through the ``APSend`` bridge method, client is
then replaced by the ``profile`` name, as last argument):

.. automethod:: sat.plugins.plugin_comp_ap_gateway.APGateway.publishMessage

The method can be used either with CLI's :ref:`debug bridge method
<li_debug_bridge_method>` or with any D-Bus tool like ``qdbus`` or ``d-feet`` (only if you
use the D-Bus bridge).

example
~~~~~~~

On its ``example.net`` Mastodon instance, Pierre has published a message with the id
``https://example.net/@pierre/106986412193109832``. To send a reply to this message,
Louise can use the following command::

  $ li debug bridge method -c APSend '"{\"node\": \"https://example.net/@pierre/106986412193109832\", \"content\": \"A lille hello from XMPP\"}","pierre\\40example.net@ap.example.org", "louise"'

Note the double escaping, one for the shell argument, and the other to specify JSON
object.