--- a/INSTALL	Wed Jun 07 09:17:05 2023 +0200
+++ b/INSTALL	Wed Jun 07 09:35:36 2023 +0200
@@ -1,98 +1,3 @@
-Libervia's installation is currently a bit tricky. Please note that this file instructs
-a minimal configuration of Libervia. For a complete procedure including the installation
-and configuration of your XMPP server and enabling the blog and directory features,
-please consult this page on the Salut à Toi wiki:
-
-http://wiki.goffi.org/w/index.php?title=Libervia/en
-
-== Prerequesites ==
-
-These steps are detailed on the Salut à Toi wiki:
-
-* install and configure Salut à Toi
-* install and configure a local XMPP server (we recommend using Prosody)
-* install sat_pubsub
-
-== Dependencies ==
-
-* you need to install the txJSON-RPC and Jinja2 dependencies (as root):
-  pip install txJSON-RPC jinja2
-* install python2-gobject2 from your distribution repositories. For example:
-  apt-get install python-gobject2
-* install pyjamas. We use the version which used to be on http://pyj.be, not the fork
-  from http://pyjs.org. Since http://pyj.be has been down for a while, you can retrieve
-  the package from our FTP.
-
-  wget ftp://ftp.goffi.org/pyjamas/pyjamas.tar.bz2
-  tar xvjf pyjamas.tar.bz2
-  cd pyjamas
-  python2.7 bootstrap.py
-  
-Note that we force the python version to 2.7. Salut à Toi and Libervia will be ported
-to Python 3 after the Twisted framework which is our main dependency.
-You can check that it works by compiling the helloworld example:
-
-  cd examples/helloworld
-  ./build.sh
-
-If you have no error message, it should be allright.
-
-== Install Libervia ==
-
-* to install Libervia using setuptools, the pyjsbuild executable should be accessible
-from your environment variable "PATH". The easiest would be:
-
-  cd pyjamas
-  sudo ln -sf `pwd`/bin/pyjsbuild /usr/bin/pyjsbuild 
-
-* clone libervia repository:
+You'll find install instructions in documentation (see doc/installation.rst).
 
-  hg clone http://repos.goffi.org/libervia
-
-* install Libervia:
-
-  cd libervia
-  python setup.py install
-
-* create an account "libervia@example.net" (replace "example.net" with your
-domain or virtual host) on your XMPP server, create a profile on SàT named
-"libervia", and plug the SàT profile to this account with jp or primitivus.
-  jp profile create libervia -j libervia@yourserver.tld -p <libervia_password>
-
-== Configuration ==
-
-You can configure the Libervia service from the SàT configuration file, for example:
-
-  [libervia]
-  port = 8080
-  port_https = 8443
-  port_https_ext = 8443
-  connection_type = both
-  ssl_certificate = libervia.pem
-  redirect_to_https = 0
-  security_warning = 1
-  passphrase = <libervia_password>
-  data_dir = ~/workspace/libervia
-
-Check the wiki for more information: http://wiki.goffi.org/wiki/Configuration/en
-
-== Usage ==
-
-The four components must be launched in the following order:
-
-* prosody
-* sat_pubsub (with the xmpp domain and password as declared in prosodi.cfg.lua)
-* sat
-* libervia's web server
-
-Your command input would look like that:
-
-  cd prosody && prosodyctl start
-  twistd sat_pubsub --jid=sat-pubsub.<xmpp_domain> --secret=<password>
-  sat
-  libervia
-
-You can now drop your web browser on http://localhost:8080/libervia.html
-
-If you encounter any issue, you can ask for help on MUC room sat@chat.jabberfr.org
-or use the dev mailing list: http://lists.goffi.org
+If you need help, come the Libervia official XMPP room: xmpp:libervia@chat.jabberfr.org?join or join us with a web browser via https://chat.jabberfr.org/converse.js/libervia@chat.jabberfr.org 

--- a/doc/installation.rst	Wed Jun 07 09:17:05 2023 +0200
+++ b/doc/installation.rst	Wed Jun 07 09:35:36 2023 +0200
@@ -2,13 +2,14 @@
 Installation
 ============
 
-This are the instructions to install Libervia (SàT) using Python.
-Note that if you are using GNU/Linux, Libervia may already be present on your distribution.
+This are the instructions to install Libervia Web using Python.
+Note that if you are using GNU/Linux, Libervia Web may already be present on your
+distribution.
 
-Libervia is a Salut à Toi frontend, the SàT backend must be installed first (if you
+This is the web frontend of Libervia, the Libervia backend must be installed first (if you
 haven't installed it yet, it will be downloaded automatically as it is a dependency of
-Libervia). Libervia and SàT backend must always have the same version (Libervia won't
-start if the version backend has not the same version).
+Libervia Web). Libervia Web and Libervia Backend must always have the same version
+(Libervia Web won't start if the version backend differs).
 
 We recommend to use development version for now, until the release of
 0.8 version.
@@ -49,9 +50,9 @@
 
     $ hg clone https://repos.goffi.org/libervia libervia-web && cd libervia-web
 
-Now you can install the requirements::
+Now you can install the frontend and its requirements::
 
-    $ pip install -r requirements.txt
+    $ pip install .
 
 If you haven't done it for the backend, you need to install the media::
 
@@ -94,17 +95,18 @@
 
 Where you'll obviously change ``libervia@example.net`` for the JID you want to use, with
 your domain name. You'll then be prompted for a password. You can now create the
-associated SàT profile::
+associated Libervia profile::
 
-  $ jp profile create libervia -j libervia@example.net -p <libervia_password>
+  $ li profile create libervia -j libervia@example.net -p <libervia_password>
 
 .. note::
 
-   jp doesn't prompt for password yet, this means that the password is visible to anybody
-   looking at your screen and will stay in your shell history, and the password will be
-   visible for a few seconds in process list. If this is a concern for you (e.g. you use a
-   shared machine), use an other frontend to create the profile, or do the necessary to
-   remove the password from history.
+   Libervia CLI doesn't prompt for password yet, this means that the password is visible
+   to anybody looking at your screen and will stay in your shell history, and the password
+   will be visible for a few seconds in process list. If this is a concern for you (e.g.
+   you use a shared machine), use an other frontend to create the profile, or do the
+   necessary to remove the password from history. In most shells, you can add a space in
+   front of the command so that it doesn't appear in the history.
 
 Finally, you need to specify to specify the password of this ``libervia`` profile in your
 configuration. To do so, edit your ``libervia.conf`` and edit ``[libervia]`` and set the
@@ -112,7 +114,7 @@
 
 .. sourcecode:: cfg
 
-    [libervia_web]
+    [web]
     passphrase = <libervia_password>
 
 You should now be good to run the Libervia Web server.
@@ -140,10 +142,10 @@
   $ libervia-web status
 
 
-SàT Pubsub
-==========
+Libervia Pubsub
+===============
 
 Some functionalities use advanced or experimental features of XMPP PubSub. We recommend to
-use the SàT PubSub service that is a side project developed for the needs of Salut à Toi,
-and consequently implements everything needed. Please refer to SàT PubSub documentation to
-know how to install and use it.
+use the Libervia PubSub service that is a side project developed for the needs of
+Libervia, and consequently implements everything needed. Please refer to Libervia PubSub
+documentation to know how to install and use it.